http://www.globalshareware.com/forum/index.cfm?forumid=1 FuseTalk Basic Edition http://www.globalshareware.com/forum/messageview.cfm?catid=17&threadid=838 2009-11-21T12:10:11 -05.00 flssm2008 1 Do you need rip Blu-ray?. With the Prosperity of Blu-ray market, many software development companies have seized this opportunity and developed Blu-ray Ripper. With Blu-ray Ripper, you can rip Blu-ray to almost all the formats you need. You can find many products of this kind by searching on the net. However, do these Blu-ray Rippers have the same quality and function? It is hard for ordinary consumers to distinguish the true from the false. For this reason, I write this article to instruct you how to rip Blu-ray reasonably.
Take iToolSoft Blu-ray Ripper, Xilisoft Blu-ray Ripper and AVCWare Blu-ray Ripper for comparison. We can get the result thatiToolSoft Blu-ray Ripper has the most direct operating procedures. We can install and run it directly after purchasing. However, Xilisoft Blu-ray Ripper and AVCWare Blu-ray Ripper cannot do this. You have to buy third-party software (Any DVD) before installing and running your Blu-ray. We can see it in the screen shots below.
The price for Any DVD is from $100 to $150(it depends on the using time you choose). That is to say, except iToolSoft Blu-ray Ripper, Xilisoft Blu-ray Ripper and AVCWare Blu-ray Ripper cannot rip Blu-ray dependently, that is the most fundamental reason why their operating cost is much higher than iToolSoft Blu-ray Ripper.
Moreover, take movie "Water Horse" for example; the reading speed of iToolSoft Blu-ray Ripper for this movie is less than one second. But Xilisoft Blu-ray Ripper and AVCWare Blu-ray Ripper will take users more than 2 minutes to read, much slower than iToolSoft Blu-ray Ripper.
The third point is users can select one kind of output audio tracks and output subtitles as the original movies had, as you like with iToolSoft Blu-ray Ripper. However, Xilisoft Blu-ray Ripper and AVCWare Blu-ray Ripper do not have these two functions
The fourth difference, which is rather important to users, is iToolSoft Blu-ray Ripper has the function of acquire titles; you can surely get complete and sequential movies after conversion. However, Xilisoft Blu-ray Ripper and AVCWare Blu-ray Ripper cannot acquire all the titles, and they can only convert single m2ts video file, the converted movies maybe not complete with these two soft wares
The fifth point, which is the last difference for these three soft wares, is the operating interface when you converting your movies. iToolSoft Blu-ray Ripper can show users a clearer converting information in preview window such as file name, file size, file path, used time and rest time while the other two can't show rest time for converting and can only show the other information in the bottom of their operating interface, not so clear as iToolSoft Blu-ray Ripper.
Finally, they all have fast converting speed and can run background.
I tested these three soft wares for many times, so to sum up, I think iToolSoft Blu-ray Ripper has the highest cost performance. It will be the best choice for users. As for Xilisoft Blu-ray Ripper and AVCWare Blu-ray Ripper, they are less satisfactory than iToolSoft Blu-ray Ripper.]]> http://www.globalshareware.com/forum/messageview.cfm?catid=17&threadid=728 2009-10-28T10:56:32 -05.00 francis 3
Yes there is an all in one video file converter on the planet!It is Cucusoft Ultimate DVD + Video Converter Suite !

Cucusoft Ultimate Converter Suite is the easiest-to-use video converter software for Apple iPod Movie and iPod Video. Cucusoft Ultimate Converter Suite is also a powerful iPod movie/video converter with fast conversion speed. You could converts DVD's and videos to play on almost any portable device including iPod, iPod touch, iPod video nano, iPhone, Zune, PSP, video capable MP3 players, video capable mobile phones, and Pocket P.C., etc with Cucusoft Ultimate Converter Suite .



Cucusoft Ultimate DVD + Video Converter Suite supports almost every audio and video output format:



Video format: H264, MP4, WMV, AVI, MOV, RM, 3GP, FLV, SWF, mpeg-1, mpeg-2, VCD, SVCD, DVD, etc.

Audio format: AC3, AAC, MP2, MP3, MP4, RA, WMA, etc...



You could enjoy all kinds of movies and music anytime and anywhere. And you can enjoy your favorite movie on your iPod as a MPEG-4 Player.



Now you can get this iPod video converter at a very competitive price! Just have a try and enjoy it! You could enjoy your Audio/Video life with this all in one Cucusoft Ultimate Converter Suite from now on.



Cucusoft Ultimate Converter Suite converts DVD's and videos to play on almost any portable device including iPod, iPod touch, iPod video nano, iPhone, Zune, PSP, video capable MP3 players, video capable mobile phones, and Pocket P.C., etc. Meanwhile, it can also support output almost any audio/video format including Video format (H264, MP4, WMV, AVI, MOV, RM, 3GP, flv, SWF, mpeg-1, mpeg-2, VCD, SVCD, DVD, etc.) and Audio format (AC3, AAC, MP2, MP3, MP4, RA, WMA, etc.).

Free download it now!http://sharewareorder.com/Mult...d-Video-Converter.html]]> http://www.globalshareware.com/forum/messageview.cfm?catid=17&threadid=723 2009-10-26T10:55:54 -05.00 lorry 1

Avex DVD to iPod Converter is the number one product which can rip dvd to iPod with high quality and super speed! Only one click, you can realize converting DVDs to iPod movie successful! Watch movies in the whole world anywhere! Don't hesitate! Build your movie list for iPod now!


Avex DVD to iPod Converter allows you to load high quality DVD movie from DVD disc or DVD folders saved in Hard Disc. While converting, you are freely to preview DVD movie .Note: the converting speed may be lower than normal if you preview DVD movie when converting. when playing the converted DVDs they ran excellent...just as smooth as using any real DVD player . The graphics looked and sounded perfect as well...no choppy pixels, and no misaligned audio, it was just like being at home.

Key Features of Avex DVD to iPod Converter:


*Convert DVD to iPod MP4 video format in one simple click.


*Load DVD movie from DVD discs or DVD folders


*Previewing DVD movie when converting DVD movie


*Adjustable video size for playback on iPod and on TV screen as well.


*Support H.264(High quality) and MPEG4 video in MP4 format used in Apple iPod


*Fully optimized for Dual-Core, HyperThread Processors, SSE2/SSE/MMX/3DNow!


*Higher converting speed than ever Built-in X!-SpeedTM transcode technology. Up to 3x faster than conventional converter .


*Advanced Settings: if you are very familiar with DVD ripping , you can specify much more settings to get output mp4 file personalized.


Solution to the benefit of Avex DVD to iPod Converter :


Q: There is so much DVD to iPod software, why choose Avex DVD to iPod Converter?


A: Good question!


This is your number one choice. For quality, speed, and customer service Avex DVD to iPod Converter toped them all. If you don't know which one to buy, get this one...you won't be disappointed.


The Avex DVD to iPod Converter was the number one product we tested. They boast having a special transcode Ttechnology that makes DVD to iPod Converter convert DVDs 3x faster. When testing this ourselves, it was much faster than any of the competition. We kept this personally and had our entire DVD collection ready to view on the iPOD within a few hours. When playing the converted DVDs they ran excellent...just as smooth as using any real DVD player. The graphics looked and sounded perfect as well...no choppy pixels, and no misaligned audio, it was just like being at home. Operating Avex DVD to iPod Converter was very easy, it only took 3 clicks of the mouse to get started. Customer service was also very good; with each email sent we got a prompt detailed reply from a friendly representative.


Publish's description of Avex DVD to iPod Converter


Avex DVD to iPod Converter is a one-click solution to convert DVDs to iPod movie. Build your movie list for iPod now! Its features superb video & audio quality and the fastest conversion techniques available on the market (Up to 3x faster). And it is very easy to use!


User reviews of Avex DVD to iPod Converter :


Avex DVD to iPod Converter obeys my thirst!


Avex DVD to iPod Converter makes my dreams come true.I could Watch DVD movies on my iPod in great quality with the help of Avex DVD to iPod Converter ! It is very easy to use and of fast speed!Well...Excellent!


Speed!


Wonderful!Higher converting speed than ever Built-in X!-SpeedTM transcode technology. Up to 3x faster than conventional converter .I like it!Its speed is so fast that beyond my imagination!Easy to use. Works well. Good interface.

Downlod it now ！http://sharewareorder.com/Mult...to-iPod-Converter.html]]> http://www.globalshareware.com/forum/messageview.cfm?catid=17&threadid=650 2009-09-29T15:57:12 -05.00 jessic 1
This guide below will show you how to convert mts files to mkv video on Mac, with mts mkv video cnverter for mac software, you can easily and fastly convert mts videos and edit mts videos with only a few steps.

Step-by-step: How to convert mts to mkv for mac
Step1ownload this versatile mts to mkv converter mac , and run it on your Mac


Step 2: Add files
Pressbutton to import mts files.


Step 3: Output format

Click "Format" comobobox to select the output format

Step 4: Output folder

Use the default folder or click" Browse" to select other folder to save

Step 5: Start converting automatically

Click "convert" button, and the converting will be work automatically.

If the converting is over, we can directly click" Open" button to open the previously setted folder.

Other editing functions are provided...try!]]> http://www.globalshareware.com/forum/messageview.cfm?catid=17&threadid=579 2009-08-06T11:47:43 -05.00 kabuqinuo 2 TextDVD to AVI Converter is a powerful and easy-to-use DVD AVI converter software, which helps you rip DVD to AVI, AVI H264/DivX/XivD, MPEG/MPEG-4,WMV. It can convert DVD to AVI with amazing sound and image quality in smaller sizes. Support cut any segment for you With Shine DVD to AVI Convert you can cut the segment that you like of the DVD movie into AVI video files by set the begin and end time of the conversion.]]> http://www.globalshareware.com/forum/messageview.cfm?catid=17&threadid=578 2009-08-06T11:45:57 -05.00 kabuqinuo 1 nullDVD to AVI Converter, in my experience I have also tried to use some species of video converter developed by different soft companies, such as itoolsoft and wondershare etc. In fact you can use the product from itoolsoft , it's easier to operate and more practically for you, the best worthy to mention is the lower price. Especially under economic crisis, I think the shine product is easy to operate and also it has competed price. Have you got some other better converter you can recommend to me, thx! Ahha~]]> http://www.globalshareware.com/forum/messageview.cfm?catid=17&threadid=568 2009-07-27T17:32:44 -05.00 illen 1 What is a DVD?

DVDs are a form of optical storage media based on the compact disc. Originally called Digital Video Disc, and later Digital Versatile Disc, "DVD" is now used with little sense of the original terms. Essentially, a DVD is a larger, faster CD that can hold video, audio, and/or computer data. Physically similar to a CD, a single-layer, single-sided DVD has a maximum capacity of 4.7GB (about two hours of MPEG-2 video), about seven times the capacity of a CD-ROM (a normal CD holds around 650MB). A double-layer, double-sided DVD-ROM disk has thirty times the capacity of a CD-ROM (over 17GB). The DVD specification supports access rates of 600KBps to 1.3MBps.
DVD-ROM describes DVDs used as computer storage. DVD-R is a once-recordable DVD format, which requires a special drive and media, while such formats as DVD-RAM, DVD-RW, and DVD-R/RW can be written multiple times.

DVD-ROM players are capable of reading CD-ROMs, CD-I disks, and video CDs, as well as new DVD-ROMs. Most DVD players can also read CD-R disks.

2.How to rip DVD to iPhone 3G on Mac?
DVD to iPhone Ripper for Mac helps you import DVD to iPhone, iPhone 3G, iPhone 3G S and other Apple player and software like iPod, Apple TV, iMovie, QuickTime, iTunes Final Cut Pro etc. It also can rip DVD to all the other video and audio formats including MPEG, MPG, MKV, MP4, WMV, MOV, FLV, M4V, MP3, MKA, AIFF, WMA, M4A, AC3, AAC, WAV, OGG, etc on Mac OS X.

Step 1: Free download and install DVD to iPhone 3G ripper for Mac
Intel Version
PowerPC Version
To install it, simply mount the .dmg archive by double-clicking it, and copy the application to your applications folder (or wherever you want).

Step 2: Load DVD to rip it and play on iPhone
Insert DVD into your DVD-ROM. Click "Load DVD" button to load your DVD. Just Click "Load IFO" button and press DVD folder or DVD IFO file.

Step 3: Select iPhone as output format
Use the "format" on the bottom of the window to control the output format. Click on the toggle to the right of the "Format" label to get format drop-down menu.


Step 4: Change iPhone Video and audio Settings
You can set output video and audio such as Resolution, Encoder, Bit rate and Frame rate of the iPhone video.

Step 5: Select output directory
Expand the "Output" panel. Use the "Browse" button to select an output directory.

Step 6: Click "Start" to Rip DVD to FLV on Mac.
If you want to trim, crop, capture screen picture, merge several video clips on to one file and more editing, please go to how to edit videos with DVD to iPhone Ripper on Mac

Since iPhone is a popular cellphone and player for all multimedia lovers especially for mac users, so i think such dvd to iPhone conversion is common when we mac users want to play our favorite on iPhone. From now on, just enjoy any DVD movies on your iPhone 3G.

Related articles:
How to rip DVD to MP4 on Mac OS?
How to rip DVD to mov on Mac?]]> http://www.globalshareware.com/forum/messageview.cfm?catid=17&threadid=556 2009-07-21T11:46:34 -05.00 gsakd878 1 http://www.globalshareware.com/forum/messageview.cfm?catid=17&threadid=550 2009-07-10T16:09:40 -05.00 harvey438 2
Pavtube DVD to 3GP Converter


Want to enjoy magic Harry Porter series on your mobile phone when you are traveling? Want to carry memorable Shirley Temple on your mobile phone in this depression time to cheer yourself up every time you feel lost and depressed? This is no big deal. All that you need are a [url=http://www.pavtube.com/dvd_to_3gp/]DVD to 3GP converter[/url], and a USB cable besides a computer and a mobile phone supporting 3GP video. By the way, if you are GSM users, you need to convert the DVD movie to 3GP video, while if you are CDMA users, you need to convert DVD movie to 3GPP2 video. Keep this in mind.
Let me show you step by step how to covert DVD to 3GP/3G2 video.
First, launch this popular [URL=http://www.pavtube.com/dvd_to_3gp/]DVD to 3GP Converter[/URL], and import DVD to file list. I use it, because it is easy to use and boasts brilliant interface, what is more, it is rips really fast and smoothly.

Second, choose an output format and do detailed settings according to your need and the mobile phone you are using.

Third, if you choose, you can edit DVD video in the way of cropping image, trimming the video and adjusting effects, flipping the video and cutting of black edges, and adjusting the volume etc.

Fourth, you can also split the DVD movie to different parts and choose some to merge to one video. In other words, you can convert part of the [url=http://www.pavtube.com/dvd_to_3gp/]DVD Movie to 3GP/3GP2[/url] video rather than converting the entire DVD.

Fifth, hit the big "Convert" button to start converting after you have finished all the settings. It takes about an hour to finish the converting depending on how long you convert the movie.
Now that you have got the exported 3GP/3GP2 video, and the rest of the work is to transfer the video to your mobile phone. Simply, you just need a USB cable to connect your computer and your mobile phone, or you can turn on Bluetooth of your computer and your mobile phone to transfer the videos on your computer to your mobile phone through Bluetooth. It is quite a convenient way.]]> http://www.globalshareware.com/forum/messageview.cfm?catid=17&threadid=541 2009-06-30T16:00:50 -05.00 webmaster 1 Global Mapper 10 is more than just a viewer capable of displaying the most popular raster, elevation and vector datasets. Global Mapper has built in functionality for distance and area calculations, raster blending, feathering, spectral analysis and contrast adjustment, elevation querying, line of sight calculations, cut-and-fill volume calculations, as well as advanced capabilities like image rectification, contour generation from surface data, view shed analysis (including Fresnel) from surface data, and triangulation and gridding of 3D point data. Repetitive tasks can be accomplished using the built in scripting language or comprehensive batch conversion functionality.

Global Mapper also includes the ability to directly access multiple online sources of imagery, topographic maps, and gridded terrain data. Global Mapper 10 includes access to worldwide high resolution color imagery from Digital Globe/GlobeXplorer/AirPhotoUSA (watermarked access for free) and access to the entire TerraServer-USA database of USGS satellite imagery and topographic maps free-of-charge. Global Mapper 10 also has the ability to easily access WMS data sources, including built-in access to elevation data and color imagery for the entire world, and to view elevation data in true 3D with any loaded raster imagery and vector data draped on top of it!

Have you ever received a dataset that does not match the projection of your current project? Simply load the dataset into Global Mapper 10 , change the projection, and save the file to match your coordinate system. If the dataset is larger than the area you are interested in, export the data using the crop feature and change the projection and format of the data at the same time.

Your data files can be loaded as layers, for example a Digital Elevation Model (DEM) can be loaded with a scanned topographical map to create a 3D view of the map. A digital aerial image can be draped on the surface together with vector contour mapping to create a stunning and informative graphic. The results can be printed, or the workspace can be exported to a high resolution raster image for use in a presentation or report.



The Key Features of the Global Mapper 10

Added support for importing ESRI personal geodatabase (MDB) files.
Added support for importing and exporting BigTIFF files.
Added more control over placement of labels for point features. Now when choosing the font to use for point features, you can also choose where to place the label for the point relative to the point location. An automatic setting will try different locations to try and make the label fit.
Added support for selecting/changing the layer that features are in when editing existing features and creating new ones with the Digitizer Too
Added KML/KMZ Super Overlay Support! This allows working with huge data sets in Google Earth. The option to automatically grid the data on the KML/KMZ export dialog enables this behavior.
Added support for creating new feature coordinates based on distance/bearing and/or COGO values from a start location using the Digitizer Tool.
Added option on the Gridding tab for exports to grid to the currently selected area features. This will create a separate export file for each selected area feature. Naming can be done using the display labels or an attribute of the selected area feature(s).
Added options when editing multiple features to rename attributes and also to copy the values of one attribute to a different attribute.
Added new Coordinate Convertor option under the Tools menu to allow easily converting a coordinate between any two supported projections/datums/units.
Added ability to Search Vector Data dialog to limit your search to the existing search results. This effectively allows you to query on multiple attributes/values.
Added a large collection of new available line styles to use when rendering line features or area feature borders.
Added option to crop a loaded raster layer to the currently selected area feature to the Cropping tab of the Raster Options dialog accessible from the Overlay Control Center.
Added support for exporting loaded vector data to the MapInfo TAB/MAP format.
Added support for exporting loaded 3D line and point data to the SEGP1 format.
Made automatic collar cropping work for BSB marine charts. Download Free Trial



Only$269.10,Save:$29.90(1O%FF)]]>