NVIDIA

Install1.Double-click the new icon on the desktop labeled R207099.EXE.2.The Self-Extracting window appears and prompts you to extract or unzip to C:\DELL\DRIVERS\R207099. Write down this path so the executable (I.e. Setup.exe) file can be found later.3.The Self-Extractor window appears.4.Click OK.5.After completing the file extraction, if the Self-Extractor window is still open, close it.6.Click the Start button and then click Run.7.Type C:\DELL\DRIVERS\R207099 in the Open textbox and then click OK.8.Follow the on-screen installation instructions.It is highly recommended to always use the most recent driver version available.Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.

Processor & Cache MemoryIntel Core2 Duo Processor T9600/T9400/P8600/P8400/P7350 : 2.8 GHz - 2.0 GHz, 1066MHz, 6/3MB On-Die L2 Cache;Chipset    Mobile Intel PM45 Express Chipset +ICH9MMain MemoryDDR2 800 MHz SDRAM, 2 x SODIMM socket for expansion up to 4GB SDRAMIntel Turbo Memory Technology with 2GB NANDFlash(optional)Display15.4" WXGA+/WSXGA+ Color-Shine (Glare-type)15.6" WXGA Color-Shine (Glare-type)Video Graphics & MemoryNVIDIA GeForce 9700M GT External 512MB GDDR3 VRAMHard DriveDual HDD:640G(320Gx2),5400rpm;7200rpm500G(250Gx2),5400rpm; 7200rpmSingle HDD:500GB,5400rpm320GB,5400rpm;7200rpm250GB,5400rpm;7200rpmOptical Drive5.25" , 12.7mmDVD Super MultiDVD Super Multi Light ScribeBlu-Ray DVD ComboCard Reader8 in 1 card reader, SD,MMC,MS,MS-Pro,mini SD w/ adapter,MS-Duo,MS-Pro Duo via adapterVideo Camera2.0 Mega Pixel web cameraFax/Modem/LAN/WLANBuilt-in Bluetooth V2.1+EDR (optional)On board 10/100/1000 Mbps Fast Ethernet controllerFull and Half duplex mode support for 10/100/1000 MbpsIntel Wireless WiFi Link 5100 ABGNAzalia Compliant and V.92/K56flex supportASUS WLAN 802.11 b/g/nLED Status Indicator    Power-on/SuspendBattery Charging/full/lowStorage device accessCapital / Scroll / Number LockWireless on status indicator(optional)Bluetooth on status indicator(optional)Interface1 x Microphone-in jack1 x Headphone-out jack1 x VGA port/Mini D-sub 15-pin for external monitor4 x USB 2.0 ports1 x IEEE 1394 port1 x RJ45 LAN Jack for LAN insert1 x HDMI1 x E-SATA1 x TV Antenna Input(optional)Hot KeysInstant launch Keys,5 buttons:Touchpad Lock,Internet access, Power4Gear eXtreme,Express Gate,Direct Console Hotkey,Function Keys:Fn+F1 Suspend switchFn+F2 WLAN switchFn+F2 Bluetooth switchFn+F3 Access to the E-mailFn+F4 Access to the InternetFn+F5 Brightness downFn+F6 Brightness upFn+F7 LCD on/offFn+F9 TouchPad LockFn+F10 Volume on/muteFn+F11 Volume downFn+F12 Volume upFn+Num Lk: Scroll Lock on/offFn+Space Power 4Gear eXtremeFn+C SplendidFn+T Power4PhoneFn+V Camera captureFn+↑: StopFn+↓: Play/PauseFn+ ←Skip to Previous TrackFn+ →Skip to Next TrackAudioBuilt-in Azalia compliant audio chip, with 3D effect & full duplexSupport Dolby Home TheaterAltec Lansing co-brand speakersKeyboardNumberic KeyboardBattery Pack & Life6 cells: 4800 mAh,9 cells: 7200 mAh,(optional)AC AdapterOutput: 19 V DC, 6.32 A, 120WInput: 100~240 V AC, 50/60 Hz universalDimension & Weight37.5 x 26.5 x 3.43-4.06 cm (W x D x H)3.3 kg (with 6 cell battery,1xHDD)SecurityBIOS Booting / HDD User Password Protection and security lockKensington lock holeSupplied AccessoriesOptical Mouse (optional)Backpack (optional)Headset (optional)TV remote controller, receiver, and antenna(optional)Multimedia SoftwareASUSDVD 6-in-1Preinstall Power2Go v5Bundle Power2Go CD (*For Premium & Ultimate)Note: Premium & Ultimate are with MCE from Windows Vista supportVirus & Tool Software    Norton Internet Security 2008Adobe Acrobat Reader 8.0NERO 7 EssentialsASUS UtilityAsus Win flash for BIOS and Driver live UpdateASUS CopyProtectASUS SmartLogonAsus Power4Gear eXtremeAsus Live UpdatePower 4 PhoneAsus NB Probe +Asus Data Security Management(ADSM)ASUS Direct ConsoleASUS Express GateIt is highly recommended to always use the most recent driver version available.Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.

CPU    1. Support for Socket AM3 / AM2+ / AM2 processors: AMD PhenomTM II X3 processor / AMD PhenomTM II X4 processor / AMD Phenom FX processor/ AMD Phenom X4 processor/ AMD Phenom X3 processor/ AMD Athlon X2 processor/ AMD Athlon processor/ AMD Sempron X2 processor/ AMD Sempron processor Hyper Transport Bus1. 5200/2000 MT/s Chipset    1. NVIDIA GeForce 8100 chipset Memory    1. 2 x 1.8V DDR2 DIMM sockets supporting up to 8 GB of system memory2. Dual channel memory architecture3. Support for DDR2 1066/800/667 MHz memory modules Audio    1. Realtek ALC888 codec2. High Definition Audio3. 2/4/5.1/7.1-channel4. Support for S/PDIF Out5. Support for CD In LAN    1. Realtek 8211CL chip (10/100/1000 Mbit) Expansion Slots    1. 1 x PCI Express x16 slot, running at x16 (The PCI Express x16 slot supports NVIDIA Hybrid SLI technology and conforms to PCI Express 2.0 standard.)2. 1 x PCI Express x1 slots3. 2 x PCI slots Storage InterfaceNVIDIA GeForce 8100 chipset:1. 1 x IDE connector supporting ATA-133/100/66/33 and up to 2 IDE devices2. 6 x SATA 3Gb/s connectors supporting up to 6 SATA 3Gb/s devices 3. Support for SATA RAID 0, RAID 1, RAID 5 RAID 10 and JBOD iTE IT8718 chip:1. 1 x floppy disk drive connector supporting up to 1 floppy disk drive USBIntegrated in the NVIDIA GeForce 8100 chipset1. Up to 10 USB 2.0/1.1 ports (4 on the back panel, 6 via the USB brackets connected to the internal USB headers) Internal I/O Connectors    1. 1 x 24-pin ATX main power connector2. 1 x 4-pin ATX 12V power connector3. 1 x floppy disk drive connector4. 1 x IDE connector5. 6 x SATA 3Gb/s connectors6. 1 x CPU fan header7. 1 x system fan headers8. 1 x front panel header9. 1 x front panel audio header10. 1 x CD In connector11. 3 x USB 2.0/1.1 headers12. 1 x serial port header13. 1 x power LED header14. 1 x chassis intrusion header Back Panel Connectors    1. 1 x PS/2 keyboard or 1 x PS/2 mouse port2. 1 x parallel port3. 1 x coaxial S/PDIF Out connector4. 1 x HDMI port 5. 1 x D-Sub port6. 1 x DVI-D port7. 4 x USB 2.0/1.1 ports8. 1 x RJ-45 port9. 3 x audio jacks (Line In/Line Out/Microphone) I/O Controller    1. iTE IT8718 chip H/W Monitoring    1. System voltage detection2. CPU/System temperature detection3. CPU/System fan speed detection4. CPU/System overheating warning5. CPU/System fan fail warning6. CPU fan speed controlBIOS    1. 2 x 8 Mbit flash2. Use of licensed AWARD BIOS3. Support DualBIOS4. PnP 1.0a, DMI 2.0, SM BIOS 2.4, ACPI 1.0b Unique Features    1. Support for @BIOS2. Support for Q-Flash3. Support for Virtual Dual BIOS4. Support for Download Center5. Support for Xpress Install6. Support for Xpress Recovery27. Support for EasyTune8. Support for Easy Energy Saver Bundle Software    1. Norton Internet Security (OEM version) Form Factor    1. Micro ATX Form Factor; 24.4cm x 22.0cm It is highly recommended to always use the most recent driver version available.Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.

CPU    1. Support for Socket AM3 / AM2+ / AM2 processors: AMD PhenomTM II X3 processor / AMD PhenomTM II X4 processor / AMD Phenom FX processor/ AMD Phenom X4 processor/ AMD Phenom X3 processor/ AMD Athlon X2 processor/ AMD Athlon processor/ AMD Sempron X2 processor/ AMD Sempron processor Hyper Transport Bus1. 5200/2000 MT/s Chipset    1. NVIDIA GeForce 8100 chipset Memory    1. 2 x 1.8V DDR2 DIMM sockets supporting up to 8 GB of system memory2. Dual channel memory architecture3. Support for DDR2 1066/800/667 MHz memory modules Audio    1. Realtek ALC888 codec2. High Definition Audio3. 2/4/5.1/7.1-channel4. Support for S/PDIF Out5. Support for CD In LAN    1. Realtek 8211CL chip (10/100/1000 Mbit) Expansion Slots    1. 1 x PCI Express x16 slot, running at x16 (The PCI Express x16 slot supports NVIDIA Hybrid SLI technology and conforms to PCI Express 2.0 standard.)2. 1 x PCI Express x1 slots3. 2 x PCI slots Storage InterfaceNVIDIA GeForce 8100 chipset:1. 1 x IDE connector supporting ATA-133/100/66/33 and up to 2 IDE devices2. 6 x SATA 3Gb/s connectors supporting up to 6 SATA 3Gb/s devices 3. Support for SATA RAID 0, RAID 1, RAID 5 RAID 10 and JBOD iTE IT8718 chip:1. 1 x floppy disk drive connector supporting up to 1 floppy disk drive USBIntegrated in the NVIDIA GeForce 8100 chipset1. Up to 10 USB 2.0/1.1 ports (4 on the back panel, 6 via the USB brackets connected to the internal USB headers) Internal I/O Connectors    1. 1 x 24-pin ATX main power connector2. 1 x 4-pin ATX 12V power connector3. 1 x floppy disk drive connector4. 1 x IDE connector5. 6 x SATA 3Gb/s connectors6. 1 x CPU fan header7. 1 x system fan headers8. 1 x front panel header9. 1 x front panel audio header10. 1 x CD In connector11. 3 x USB 2.0/1.1 headers12. 1 x serial port header13. 1 x power LED header14. 1 x chassis intrusion header Back Panel Connectors    1. 1 x PS/2 keyboard or 1 x PS/2 mouse port2. 1 x parallel port3. 1 x coaxial S/PDIF Out connector4. 1 x HDMI port 5. 1 x D-Sub port6. 1 x DVI-D port7. 4 x USB 2.0/1.1 ports8. 1 x RJ-45 port9. 3 x audio jacks (Line In/Line Out/Microphone) I/O Controller    1. iTE IT8718 chip H/W Monitoring    1. System voltage detection2. CPU/System temperature detection3. CPU/System fan speed detection4. CPU/System overheating warning5. CPU/System fan fail warning6. CPU fan speed controlBIOS    1. 2 x 8 Mbit flash2. Use of licensed AWARD BIOS3. Support DualBIOS4. PnP 1.0a, DMI 2.0, SM BIOS 2.4, ACPI 1.0b Unique Features    1. Support for @BIOS2. Support for Q-Flash3. Support for Virtual Dual BIOS4. Support for Download Center5. Support for Xpress Install6. Support for Xpress Recovery27. Support for EasyTune8. Support for Easy Energy Saver Bundle Software    1. Norton Internet Security (OEM version) Form Factor    1. Micro ATX Form Factor; 24.4cm x 22.0cm It is highly recommended to always use the most recent driver version available.Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.

CPU    1. Support for Socket AM3 / AM2+ / AM2 processors: AMD PhenomTM II X3 processor / AMD PhenomTM II X4 processor / AMD Phenom FX processor/ AMD Phenom X4 processor/ AMD Phenom X3 processor/ AMD Athlon X2 processor/ AMD Athlon processor/ AMD Sempron X2 processor/ AMD Sempron processor Hyper Transport Bus1. 5200/2000 MT/s Chipset    1. NVIDIA GeForce 8100 chipset Memory    1. 2 x 1.8V DDR2 DIMM sockets supporting up to 8 GB of system memory2. Dual channel memory architecture3. Support for DDR2 1066/800/667 MHz memory modules Audio    1. Realtek ALC888 codec2. High Definition Audio3. 2/4/5.1/7.1-channel4. Support for S/PDIF Out5. Support for CD In LAN    1. Realtek 8211CL chip (10/100/1000 Mbit) Expansion Slots    1. 1 x PCI Express x16 slot, running at x16 (The PCI Express x16 slot supports NVIDIA Hybrid SLI technology and conforms to PCI Express 2.0 standard.)2. 1 x PCI Express x1 slots3. 2 x PCI slots Storage InterfaceNVIDIA GeForce 8100 chipset:1. 1 x IDE connector supporting ATA-133/100/66/33 and up to 2 IDE devices2. 6 x SATA 3Gb/s connectors supporting up to 6 SATA 3Gb/s devices 3. Support for SATA RAID 0, RAID 1, RAID 5 RAID 10 and JBOD iTE IT8718 chip:1. 1 x floppy disk drive connector supporting up to 1 floppy disk drive USBIntegrated in the NVIDIA GeForce 8100 chipset1. Up to 10 USB 2.0/1.1 ports (4 on the back panel, 6 via the USB brackets connected to the internal USB headers) Internal I/O Connectors    1. 1 x 24-pin ATX main power connector2. 1 x 4-pin ATX 12V power connector3. 1 x floppy disk drive connector4. 1 x IDE connector5. 6 x SATA 3Gb/s connectors6. 1 x CPU fan header7. 1 x system fan headers8. 1 x front panel header9. 1 x front panel audio header10. 1 x CD In connector11. 3 x USB 2.0/1.1 headers12. 1 x serial port header13. 1 x power LED header14. 1 x chassis intrusion header Back Panel Connectors    1. 1 x PS/2 keyboard or 1 x PS/2 mouse port2. 1 x parallel port3. 1 x coaxial S/PDIF Out connector4. 1 x HDMI port 5. 1 x D-Sub port6. 1 x DVI-D port7. 4 x USB 2.0/1.1 ports8. 1 x RJ-45 port9. 3 x audio jacks (Line In/Line Out/Microphone) I/O Controller    1. iTE IT8718 chip H/W Monitoring    1. System voltage detection2. CPU/System temperature detection3. CPU/System fan speed detection4. CPU/System overheating warning5. CPU/System fan fail warning6. CPU fan speed controlBIOS    1. 2 x 8 Mbit flash2. Use of licensed AWARD BIOS3. Support DualBIOS4. PnP 1.0a, DMI 2.0, SM BIOS 2.4, ACPI 1.0b Unique Features    1. Support for @BIOS2. Support for Q-Flash3. Support for Virtual Dual BIOS4. Support for Download Center5. Support for Xpress Install6. Support for Xpress Recovery27. Support for EasyTune8. Support for Easy Energy Saver Bundle Software    1. Norton Internet Security (OEM version) Form Factor    1. Micro ATX Form Factor; 24.4cm x 22.0cm It is highly recommended to always use the most recent driver version available.Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.

Processor & Cache MemorySupport Intel i7 Quad Core Processor CPUChipsetMobile Intel HM55 Express ChipsetMain MemoryDDR3 1333 MHz SDRAM, 3 x SODIMM socket for expansion up to 12GB SDRAMDisplay    7.3" 16:9 Full HD (1920x1080)/HD+ (1600x900) LED backlit,Asus Splendid Video Intelligent TechnologyVideo Graphics & MemoryNVIDIA GeForce GT 425M with 1GB DDR3 VRAMHard Drive2.5" 9.5mm SATA750GB,7200rpm640GB,5400rpm500GB,5400rpm;7200rpm320GB,5400rpm;7200rpmDual HDD supportOptical DriveDVD Super Multi Double LayerBlu-ray RWCard Reader4 in 1 card reader SD,MMC,MS,MS-ProVideo Camera2.0 Mega Pixel web camera(optional)Fax/Modem/LAN/WLANIntegrated 802.11 b/g/nBuilt-in Bluetooth V2.1+EDR (optional)10/100/1000 Base TInterface1 x Microphone-in jack1 x Headphone-out jack (S/PDIF)1 x VGA port/Mini D-sub 15-pin for external monitor1 x USB 3.0 ports (optional)2 x USB 2.0 ports1 x RJ45 LAN Jack for LAN insert1 x HDMI1 x WLAN On/Off Switch1 x E-SATA (USB 2.0 combo)AudioBuilt-in speaker and microphoneBang & Olufsen ICEpowerSonicFocusBattery Pack & Life6 cells: 4400 mAh 47 WhrsAC AdapterOutput: 19 V DC, 6.32 A, 120 WInput: 100-240 V AC, 50/60 Hz universalDimension & Weight42.0 x 28.7 x 3.67~4.05 cm (W x D x H)3.40 kg (with 6 cell battery)It is highly recommended to always use the most recent driver version available.Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.

New in Release 259.57:- Support for newly announced Quadro 6000, Quadro 5000 and Quadro 4000.- Adds support for CUDA 3.1 for improved performance in GPU Computing applications.- Adds support for OpenGL 4.0- Adds support for DirectX 11- ECC State* New page for GPUs that support ECC (error correction code). The page lets you                + Change the Error Correction Code (ECC) state for GPUs.                + View GPU memory details.- EDID Management* Accessible from the View System Topology page, this feature lets you:                + View the connector information                + Get an EDID from a connected display and save it to disk                + Force an EDID at a connector                + Remove a forced EDID from a connector- The SDI Capture page is now available with Windows Vista and Windows 7 drivers.- Workstation application compatibility fixes. Please read the release notes for more information on product support, feature limitations, driver fixes and known compatibility issues.- Users without US English operating systems can select their language and download the International driver.Existing Support:- Support for the Open Computing Language (OpenCL) 1.0 in Quadro FX Series x700 and newer as well as the FX4600 and FX5600.- Supports NVIDIA SLI technology (two-way SLI) for DirectX 9, DirectX 10, and OpenGL on SLI-certified Intel X58-based motherboard based system from select OEMs.- Support for DDC-Ci/MCCS over the DisplayPort AUX channel.- 10-bits per color (10bpc) DisplayPort support for full-screen applications on supported products.It is highly recommended to always use the most recent driver version available.Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.

New in Release 259.57:- Support for newly announced Quadro 6000, Quadro 5000 and Quadro 4000.- Adds support for CUDA 3.1 for improved performance in GPU Computing applications.- Adds support for OpenGL 4.0- Adds support for DirectX 11- ECC State* New page for GPUs that support ECC (error correction code). The page lets you                + Change the Error Correction Code (ECC) state for GPUs.                + View GPU memory details.- EDID Management* Accessible from the View System Topology page, this feature lets you:                + View the connector information                + Get an EDID from a connected display and save it to disk                + Force an EDID at a connector                + Remove a forced EDID from a connector- The SDI Capture page is now available with Windows Vista and Windows 7 drivers.- Workstation application compatibility fixes. Please read the release notes for more information on product support, feature limitations, driver fixes and known compatibility issues.- Users without US English operating systems can select their language and download the International driver.Existing Support:- Support for the Open Computing Language (OpenCL) 1.0 in Quadro FX Series x700 and newer as well as the FX4600 and FX5600.- Supports NVIDIA SLI technology (two-way SLI) for DirectX 9, DirectX 10, and OpenGL on SLI-certified Intel X58-based motherboard based system from select OEMs.- Support for DDC-Ci/MCCS over the DisplayPort AUX channel.- 10-bits per color (10bpc) DisplayPort support for full-screen applications on supported products.It is highly recommended to always use the most recent driver version available.Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.

New in Release 259.57:- Support for newly announced Quadro 6000, Quadro 5000 and Quadro 4000.- Adds support for CUDA 3.1 for improved performance in GPU Computing applications. - Adds support for OpenGL 4.0- Adds support for DirectX 11- ECC State* New page for GPUs that support ECC (error correction code). The page lets you:                + Change the Error Correction Code (ECC) state for GPUs.                + View GPU memory details.- EDID Management* Accessible from the View System Topology page, this feature lets you:                + View the connector information                + Get an EDID from a connected display and save it to disk                + Force an EDID at a connector                + Remove a forced EDID from a connector- The SDI Capture page is now available with Windows Vista and Windows 7 drivers.- Workstation application compatibility fixes. Please read the release notes for more information on product support, feature limitations, driver fixes and known compatibility issues.Existing Support:- Support for the Open Computing Language (OpenCL) 1.0 in Quadro FX Series x700 and newer as well as the FX4600 and FX5600.- Supports NVIDIA SLI technology (two-way SLI) for DirectX 9, DirectX 10, and OpenGL on SLI-certified Intel X58-based motherboard based system from select OEMs.- Support for DDC-Ci/MCCS over the DisplayPort AUX channel.- 10-bits per color (10bpc) DisplayPort support for full-screen applications on supported products.- Users without US English operating systems can select their language and download the International driver.It is highly recommended to always use the most recent driver version available.Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.

New in Release 259.57:- Support for newly announced Quadro 6000, Quadro 5000 and Quadro 4000.- Adds support for CUDA 3.1 for improved performance in GPU Computing applications. - Adds support for OpenGL 4.0- Adds support for DirectX 11- ECC State* New page for GPUs that support ECC (error correction code). The page lets you:                + Change the Error Correction Code (ECC) state for GPUs.                + View GPU memory details.- EDID Management* Accessible from the View System Topology page, this feature lets you:                + View the connector information                + Get an EDID from a connected display and save it to disk                + Force an EDID at a connector                + Remove a forced EDID from a connector- The SDI Capture page is now available with Windows Vista and Windows 7 drivers.- Workstation application compatibility fixes. Please read the release notes for more information on product support, feature limitations, driver fixes and known compatibility issues.Existing Support:- Support for the Open Computing Language (OpenCL) 1.0 in Quadro FX Series x700 and newer as well as the FX4600 and FX5600.- Supports NVIDIA SLI technology (two-way SLI) for DirectX 9, DirectX 10, and OpenGL on SLI-certified Intel X58-based motherboard based system from select OEMs.- Support for DDC-Ci/MCCS over the DisplayPort AUX channel.- 10-bits per color (10bpc) DisplayPort support for full-screen applications on supported products.- Users without US English operating systems can select their language and download the International driver.It is highly recommended to always use the most recent driver version available.Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.