CANON

Fixes:1. Extends the timing at which the high temperature warning indicator is displayed and the timing of automatic shut down of the camera due to a rise in internal temperature during Live View or EOS Movie functions.2. Optimizes program shift when the ISO setting of the camera is set to AUTO.3. Corrects a misspelling in the French-language menu.4. Corrects a phenomenon in which vertical magenta-colored banding appears in still images taken in movie-shooting mode. (This only occurs when in Manual exposure mode and when the ISO speed is set to "H". Note that this phenomenon only affects units with Firmware Version 1.2.0.)It is highly recommended to always use the most recent driver version available.Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.

Fixes:This firmware update (Version 2.0.7) incorporates the following improvements and fixes.1. Fixes a phenomenon in which the aperture exhibits abnormal movement when shooting movies in manual exposure mode and Aperture Priority AE (Av mode) using some Canon lenses (such as macro lenses).2. Fixes a phenomenon in which the exposure level shown in the LCD panel differs from what is shown in the viewfinder when shooting still images in manual exposure mode.3. Fixes a phenomenon in which the Wireless File Transmitter (WFT-E4 or WFT-E4 II B) may not automatically power off when used for FTP transfers. These phenomena only occur with the Version 2.0.4 and Version 2.0.3 firmware. The Version 2.0.7 firmware being released this time is for cameras with firmware up to Version 2.0.4. If the camera's firmware is already Version 2.0.7, it is not necessary to update the firmware.It is highly recommended to always use the most recent driver version available.Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.

Fixes:By updating the firmware of the WFT-E2 / E2A with Version 2.0.0, the WFT-E2 / E2A can be used with the EOS-1D Mark IV digital SLR camera.It is highly recommended to always use the most recent driver version available.Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.

Fixes:This firmware update (Version 1.0.6) incorporates the following enhancement.1. Firmware Version 1.0.6 enhances the AF tracking performance.* *AF performance has been enhanced for receding subjects and for subjects that are approaching at a low speed.Firmware Version 1.0.6 is for cameras with firmware up to version 1.0.4. If the camera's firmware is already version 1.0.6, it is not necessary to update the firmware. (Please note that there is no Firmware Version 1.0.5.)It is highly recommended to always use the most recent driver version available.Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.

Fixes:Firmware Version 1.1.0 incorporates the following fixes and improvements.   1. Enhances the reliability of Live View shooting   2. Fixes incorrect indications on the Arabic, English, and Swedish menu screensFirmware Version 1.1.0 is for cameras with firmware up to Version 1.0.9. If the camera's firmware is already Version 1.1.0, it is not necessary to update the firmware. It is highly recommended to always use the most recent driver version available.Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.

Fixes: In the Version 2.0.4 firmware, the following phenomena that occurred with the Version 2.0.3 firmware (which was to enhance the movie functions) have been corrected.- There was a phenomenon in which the manual recording settings made in C1/C2/C3 were changed and sound could not be recorded if manual sound recording was used in the C1/C2/C3 settings and the camera was subsequently turned off (or if Auto Power Off was activated). This does not occur in modes other than C1/C2/C3.The Version 2.0.4 firmware includes the movie function enhancements listed in items 1 through 5 below, and also incorporates the correction listed in item 6.1. Adds or changes the following movie frame rates.NTSC:- 1920×1080 : 30 fps (changed - actual 29.97 fps)- 1920×1080 : 24 fps (added - actual 23.976 fps)- 640×480 : 30 fps (changed - actual 29.97 fps)PAL:- 1920×1080 : 25 fps (added - actual 25.0 fps)- 1920×1080 : 24 fps (added - actual 23.976 fps)- 640×480 : 25 fps (added - actual 25.0 fps)2. Adds a function for manually adjusting the sound recording level (64 levels).3. Adds a histogram display (brightness or RGB) for shooting movies in manual exposure.4. Adds shutter-priority AE mode (Tv) and aperture-priority AE (Av) mode to the exposure modes for shooting movies.5. Changes the audio sampling frequency from 44.1 KHz to 48 KHz.6. Fixes a phenomenon where communication between the camera and the attached lens is sometimes interrupted after manual sensor cleaning. (This phenomenon only affects units with Firmware Version 1.2.4.)Caution:- Firmware Version 2.0.4 is for cameras with firmware up to version 2.0.3. If the camera's firmware is already version 2.0.4, it is not necessary to update the firmware.- Movies captured using EOS 5D Mark II cameras with Firmware Version 1.1.0 to 1.2.4 can be played back on cameras updated with Firmware Version 2.0.4. However, if you try to play back movies captured with a camera with the new firmare on a camera with a previous firmare version, a message, Cannot play back image, appears on the camera's LCD monitor.- It is recommended that you use the latest Canon applications*1 to edit movies captured with EOS 5D Mark II cameras that have the latest firmare because some previous versions do not support movie-editing functions and the frame rates that are added or changed by the latest firmware. You can download the latest Canon applications from our Web site.*1 ZoomBrowser EX Version 6.5.0 or later (compatible operating systems : Windows XP/Vista/7)  ImageBrowser Version 6.5.0 or later (compatible operating systems : Mac OS X v10.4/10.5/10.6)- In addition to the enhancements to the movie function, the accompanying instruction manual has also been revised. Users are asked to download both the latest firmware and the latest instruction manual. You can proceed to download the instruction manual by clicking the [I Agree] button from the bottom of this page.It is highly recommended to always use the most recent driver version available.Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.

Fixes:1. Adds detailed information about three new lenses.2. Polish has been added as a new display language in the menu screens.It is highly recommended to always use the most recent driver version available.Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.

Fixes:This firmware update (Version 1.2.4) is for using the EOS-5D Mark II with the WFT-E4 II, and for correcting the phenomenon described below.Corrects a phenomenon that visible noise may appear in images taken by continuous Bulb shooting. This firmware update corrects a phenomenon that if the [C.Fn II-1 Long exposure noise reduction] setting is set to [2: On], noise may appear in images that are captured while the previous image is still being generated.It is highly recommended to always use the most recent driver version available.Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.

Fixes:1.  Supports the WFT-E2 II wireless file transmitter that was released in December 2009.Firmware Version 1.3.0 is for cameras with firmware up to Version 1.2.5. If the camera's firmware is already Version 1.3.0, it is not necessary to update the firmware.In addition, after the firmware is updated, if the WFT-E2 / E2A or WFT-E2 II wireless file transmitter is used with the camera, the indications that appear under [Communication mode] on the [WFT settings] menu are changed as follows:FTP -> FTP transPTP(PC) -> EOSUtilityHTTP -> WFTserverHTTP account -> WFT accountIt is highly recommended to always use the most recent driver version available.Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.

Fixes:1.  Supports the WFT-E2 II wireless file transmitter that was released in December 2009.Firmware Version 1.3.0 is for cameras with firmware up to Version 1.2.5. If the camera's firmware is already Version 1.3.0, it is not necessary to update the firmware.In addition, after the firmware is updated, if the WFT-E2 / E2A or WFT-E2 II wireless file transmitter is used with the camera, the indications that appear under [Communication mode] on the [WFT settings] menu are changed as follows:FTP -> FTP transPTP(PC) -> EOSUtilityHTTP -> WFTserverHTTP account -> WFT accountIt is highly recommended to always use the most recent driver version available.Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.