CPU
- AMD Phenom processor (Socket AM2+)
- AMD Athlon 64 X2 Dual Core/ Athlon 64 / Sempron processor
- High-performance Hyper Transport CPU interface.
- Support transfer rate of 2000/1600/1200 mega-transfers per second
- Note: This board supports CPU up to 89W TDP ; you can refer to AMD website to check your CPU.
CHIPSET
- AMD 740G & AMD SB710
- North Bridge: AMD 740G
- South Bridge: AMD SB710
GRAPHICS
- On Chip ( AMD 740G with 2D/3D graphic engine)
- Integrated DirectX 9 graphics processor
- Share Memory: Maximum up to 512MB
MEMORY
- Dual-channel DDR2 memory architecture
- 2 x 240-pin DDR2 DIMM socket support up to 8 GB*
- Support DDR2 800/667/533/400 DDR2 SDRAM
EXPANSION SLOT
- 1 x PCI Express x16 slot
- 1 x PCI Express x1 slot
- 2 x PCI slots
STORAGE
- Support by AMD SB710
- 2 x Ultra DMA133/100/66 devices
- 6 x Serial ATA 3.0Gb/s devices
- RAID0, RAID1, RAID10 configuration
AUDIO
- Compliant with HD audio specification
- IDT 92HD202 6-channel audio ( CO-lay 92HD206)
LAN
- Realtek RTL8103EL 10/100 LAN (RTL8111DL Gigabit LAN Optional)
REAR PANEL I/O
- 1 x Ethernet Port
- 1 x PS/2 keyboard & PS/2 mouse connectors
- 1 x Serial port (COM1)
- 1 x VGA port
- 4 x USB 2.0 Ports
- 1 x Audio port (Line-in, Line-out, Mic-in)
- 1 x DVI connector (optional)
INTERNAL I/O CONNECTORS & HEADERS
- 1 x 24-pin ATX Power Supply connector
- 1 x 4-pin 12V Connector
- 1 x CPU_FAN connector
- 1 x SYS Fan header
- 1 x IDE connector
- 6 x Serial ATA 3Gb/s connectors
- 1 x Speaker header
- 1 x Front panel switch/LED header
- 1 x Front panel audio header
- 1 x SPDIF out header
- 1 x CD in header
- 3 x USB headers
- 1 x LPT header
- 1 x IR header
SYSTEM BIOS
- AMI BIOS with 8Mb SPI ROM
- Supports Plug and Play, STR/STD, Hardware monitor, Multi Boot, DMI
- Supports ACPI revision 3.0 specification
FORM FACTOR
- Micro-ATX Size, 244mm*210mm
It is highly recommended to always use the most recent driver version available.
Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.
Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.
