Albatron

FeatureIntel Core 2 Quad/ Core 2 Extreme/ Core 2 Duo/ Pentium D/ Pentium 4/ Celeron ProcessorsSocket 775 with FSB 1333/1066/800 MHz4* DDRII 800/667/533 Memory Sockets (Dual Channel)1* PCI Express x 16, 2* PCI Express x 1, 3* PCI Slots8 Channel High Definition AudioMarvell Gbit LAN4* SATAII 3Gb/s channels1* ATA 100 channel8* USB 2.0/1.1 Ports (4 ports by optional cable)ProcessorSocket 775 with Intel Core 2 Quad/ Core 2 Extreme/ Core 2 Duo/ Pentium D/ Pentium 4/ Celeron ProcessorsFSB / Transport1333/1066/800 MHz It is highly recommended to always use the most recent driver version available.Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.

   InitialSpecifications:Intel CoreTM2 Duo Mobile processorSocket P with FSB 800/533 MHz1 DDRII SO-DIMM 667/ 533 SocketIntegrated Mobile Intel®GMA X3100 Graphics Engine,and provides DVI/ D-SUB/ TV-OUT interfaceRealtek 8 Channel High Definition AudioMarvell Gbit Dual LAN1 PCI Express x 16, 1 Mini-PCI Slot3 SATA II 3Gb/s Channels1 ATA133 Channel8 USB 2.0/1.1 Ports (4 ports by optional cable)It is highly recommended to always use the most recent driver version available.Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.

Supports Intel Core 2 Duo Processor E8400 (3 GHz) CPU.Features:Intel CoreTM 2 Quad/ CoreTM 2 Duo/ Pentium D/ Pentium 4/ Celeron D processorSocket 775 with FSB 1333 (by overclocking)/ 1066/ 800/ 533 MHz2* DDRII 800 (by overclocking)/ 667/ 533 memory socketsIntegrated NVIIDA GeForce 7050 Graphics Engine1* PCI Express x16, 1* PCI Express x1, 2* PCI slots6 Channel High Definition AudioRealtek 10/100 LAN PHY4* SATAII 3Gb/s channels supporting SATA RAID 0/ 11* ATA 100 channel8* USB 2.0/1.1 Ports (4 ports by optional cable)ProcessorSocket 775 with Intel CoreTM 2 Quad/ CoreTM 2 Duo/ Pentiumv D/ Pentium 4/ Celeron D processorFSB / Transport1333 (by overclocking)/ 1066/ 800/ 533 MHzChipsetChipset?FnVIDIA GeForce 7050/ nForce 610iLAN PHY?FRealtek RTL 8201N 10/100 LAN PHYHD Audio Codec?FRealtek ALC662I/O Chip?FFintek F71882FGMemory2* DDRII socketsDDRII 800 (by overclocking)/ DDRII 667/ DDRII 533 SDRAMs up to 4 GBExpansion Slots1* PCI Express x161* PCI Express x12* PCI slotsIDE / SATA Connectors1* ATA 100 channel supporting 2* IDE devices4* SATAII 3Gb/s channels up to 4* SATAII devices supporting SATA RAID 0/ 1Onboard I/O Connectors1* Floppy Connector1* Front Audio header2* USB 2.0/1.1 header (4 ports by optional cable)1* COM1 header1* IrDA header1* HDMI-SPDIF out header1* CD-IN header1* CPU Fan header (1 fan rotation detection function)2* System Fan headers (2 fan rotation detection function)2 x 5 pin Front Panel headerI/O via Back Panel1* PS/2 Keyboard/Mouse, 4* USB (2.0/1.1), 1* D-SUB, 1* RJ45 LAN, 1* Line-in/ Line-out/ MIC-inPower24-pin ATX power connector, 8-pin ATX 12V power connectorBIOS Feature8Mb SPI Flash ROMAward BIOS with ACPI, DMI 2.0, PnP, WfM 2.0, Green Suspend to RAM (S3), Suspend to Disk (S4) Wake on keyboard/mouse, Wake on LAN/RTC TimerHardware Monitoring3 FAN sensors, CPU & System voltages and temperature monitoringSpecial FeatureAdjustable CPU frequency by 1 MHz increment, Adjustable Vcore, VMemory for overclockingCertificationsFCC, CE, BSMIForm FactorMicro-ATX (205 mm x 245 mm)It is highly recommended to always use the most recent driver version available.Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.

InitialSpecifications: CPU Intel Chipset Intel 945GC/ ICH7 Socket 775 Form Factor Micro-ATX (180 mm x 244 mm) FSB/Hyper Transport 1333 MHz (By overclocking)/ 1066 MHz (By overclocking)/ 800 MHz/ 533 MHz Memory 2* DDRII 667 (By overclocking)/ 533/ 400 (Dual Channel) Int. GFX Y (Intel GMA 950 Graphics) AGP N PCI-E/PCI 1* PCI-Express x16 slot, 2* PCI slots USB 8* USB 2.0/1.1 Ports (4 ports by optional cable) LAN Marvell 10/100 Mbps LAN Sound Realtek 6 Channel HD Audio IDE 1* ATA 100 channel RAID N Serial ATA 4* SATAII 3Gb/s ChannelsIt is highly recommended to always use the most recent driver version available.Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.

1.Support Celeron D CPU.FeatureIntel Pentium 4 Processor (Celeron/Willamette/Northwood/Prescott(FMB1.0))Socket 478 with FSB 400/533MHz2 DDR266/200 Memory Sockets6 channel AC 97 Audio2 ATA133 Channels, up to 4 ATA 133 IDE Devices6 USB 2.0/1.1 Ports (4 ports by optional cProcessorIntel Pentium4 Processor (Celeron/Willamette/Northwood/Prescott(FMB1.0))FSB / Transport400/533MHzChipsetNorth Bridge : VIA VT8751A (P4M266A Ver:CE)South Bridge : VIA VT8235Audio Codec : VIA VT1616I/O Chip : Winbond W83697HFMemory2 * DDR SocketsDDR266/DDR200 NON-ECC DDR SDRAM up to 2GBNote1: (If you do install DDR 333/400 memory, it will perform at DDR 266 speeds)Expansion Slots1 x AGP(2.0) 4X slot (1.5V only)3 x PCI slots (PCI 2.2 compliant)IDE / SATA Connectors2 ATA133 channels, up to 4 ATA 133 IDE devicesOnboard I/O Connectors1 x Floppy Connector2 x USB 2.0/1.1 header (4 ports by optional cable)1 x CD_IN header1 x COM (serial) port header (Optional COM cable)1 x S/PDIF out header (S/PDIF out cable optional)1 x CPU fan header with fan rotation detection function1I/O via Back PanelPS/2 keyboard/mouse, 2 x USB(2.0/1.1), 1 x VGA , 1 x Com(serial), 1 x Parallel, 1x Game/Line-in/Line-out/MICPower20-pin ATX power connector, 4-pin ATX 12V power connectorBIOS Feature2Mb Flash EEPROMAward BIOS with ACPI, DMI2.0, PnP, WfM2.0, GreenSuspend to RAM (S3), Suspend to Disk (S4)Wake on keyboard/mouse, Wake on LAN/RTC TimerHardware Monitoring2 FAN sensors, CPU/System voltages and temperature monitoringSpecial FeatureZero Jumper DesignWatch Dog Timer (auto-reset system when it can not handle overclock configurations)CertificationsFCC, CE, BSMIForm FactorMicro ATX (244mm x 225mm)It is highly recommended to always use the most recent driver version available.Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.

1.Fixed intel 82559 10/100 pros nic card unstableFeatureIntel Pentium 4 Processor (Celeron/Willamette/Northwood/Prescott(FMB1.0))Socket 478 with FSB 400/533MHz2 DDR266/200 Memory Sockets6 channel AC 97 Audio2 ATA133 Channels, up to 4 ATA 133 IDE Devices6 USB 2.0/1.1 Ports (4 ports by optional cProcessorIntel Pentium4 Processor (Celeron/Willamette/Northwood/Prescott(FMB1.0))FSB / Transport400/533MHzChipsetNorth Bridge : VIA VT8751A (P4M266A Ver:CE)South Bridge : VIA VT8235Audio Codec : VIA VT1616I/O Chip : Winbond W83697HFMemory2 * DDR SocketsDDR266/DDR200 NON-ECC DDR SDRAM up to 2GBNote1: (If you do install DDR 333/400 memory, it will perform at DDR 266 speeds)Expansion Slots1 x AGP(2.0) 4X slot (1.5V only)3 x PCI slots (PCI 2.2 compliant)IDE / SATA Connectors2 ATA133 channels, up to 4 ATA 133 IDE devicesOnboard I/O Connectors1 x Floppy Connector2 x USB 2.0/1.1 header (4 ports by optional cable)1 x CD_IN header1 x COM (serial) port header (Optional COM cable)1 x S/PDIF out header (S/PDIF out cable optional)1 x CPU fan header with fan rotation detection function1I/O via Back PanelPS/2 keyboard/mouse, 2 x USB(2.0/1.1), 1 x VGA , 1 x Com(serial), 1 x Parallel, 1x Game/Line-in/Line-out/MICPower20-pin ATX power connector, 4-pin ATX 12V power connectorBIOS Feature2Mb Flash EEPROMAward BIOS with ACPI, DMI2.0, PnP, WfM2.0, GreenSuspend to RAM (S3), Suspend to Disk (S4)Wake on keyboard/mouse, Wake on LAN/RTC TimerHardware Monitoring2 FAN sensors, CPU/System voltages and temperature monitoringSpecial FeatureZero Jumper DesignWatch Dog Timer (auto-reset system when it can not handle overclock configurations)CertificationsFCC, CE, BSMIForm FactorMicro ATX (244mm x 225mm)It is highly recommended to always use the most recent driver version available.Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.

Initial Release VersionFeatureIntel Pentium 4 Processor (Celeron/Willamette/Northwood/Prescott(FMB1.0))Socket 478 with FSB 400/533MHz2 DDR266/200 Memory Sockets6 channel AC 97 Audio2 ATA133 Channels, up to 4 ATA 133 IDE Devices6 USB 2.0/1.1 Ports (4 ports by optional cProcessorIntel Pentium4 Processor (Celeron/Willamette/Northwood/Prescott(FMB1.0))FSB / Transport400/533MHzChipsetNorth Bridge : VIA VT8751A (P4M266A Ver:CE)South Bridge : VIA VT8235Audio Codec : VIA VT1616I/O Chip : Winbond W83697HFMemory2 * DDR SocketsDDR266/DDR200 NON-ECC DDR SDRAM up to 2GBNote1: (If you do install DDR 333/400 memory, it will perform at DDR 266 speeds)Expansion Slots1 x AGP(2.0) 4X slot (1.5V only)3 x PCI slots (PCI 2.2 compliant)IDE / SATA Connectors2 ATA133 channels, up to 4 ATA 133 IDE devicesOnboard I/O Connectors1 x Floppy Connector2 x USB 2.0/1.1 header (4 ports by optional cable)1 x CD_IN header1 x COM (serial) port header (Optional COM cable)1 x S/PDIF out header (S/PDIF out cable optional)1 x CPU fan header with fan rotation detection function1I/O via Back PanelPS/2 keyboard/mouse, 2 x USB(2.0/1.1), 1 x VGA , 1 x Com(serial), 1 x Parallel, 1x Game/Line-in/Line-out/MICPower20-pin ATX power connector, 4-pin ATX 12V power connectorBIOS Feature2Mb Flash EEPROMAward BIOS with ACPI, DMI2.0, PnP, WfM2.0, GreenSuspend to RAM (S3), Suspend to Disk (S4)Wake on keyboard/mouse, Wake on LAN/RTC TimerHardware Monitoring2 FAN sensors, CPU/System voltages and temperature monitoringSpecial FeatureZero Jumper DesignWatch Dog Timer (auto-reset system when it can not handle overclock configurations)CertificationsFCC, CE, BSMIForm FactorMicro ATX (244mm x 225mm)It is highly recommended to always use the most recent driver version available.Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.

1.Fixed PS2 mouse can't wakeup from S3/S4/S5 .2.Fixed for Kingmax/ CORSAIR double side 512Mbx3 Memory.3.Supports Prescott CPU. (PX848 Like / Pro (V1.1) only).FeatureIntel Pentium4 Processor (Willamette/Northwood)Socket 478 with FSB 400/533/800 MHz(FSB 800 is by overclocking or using 200MHz Clock Frequency CPU)3 DDR200/266/333/400 (DDR333/400 by overclocking) Memory Sockets3CProcessorSocket 478 Intel PentiumProcessor (Willamette/Northwood)FSB / Transport400/533/800 MHz(FSB 800 is by overclocking or using 200MHz Clock Frequency CPU)ChipsetNorth Bridge : Intel 845ESouth Bridge : Intel ICH4Audio Codec : Realtek ALC650 CodecI/O Chip : Winbond Smart I/O W83627HFLAN Chip : 3Com 3C910-A01 LAN chipMemory3 *DDR SocketsDDR 200/266/333/400 (DDR333/400 by overclocking) NON-ECC DDR SDRAM up to 2GB ( DIMM1 uses 2 Banks/ DIMM2 & DIMM3 share 2 Banks )Expansion Slots1 x AGP 4X slot ( 1.5V only)5 x PCI slots (PCI 2.2 compliant)IDE / SATA Connectors2 ATA66/100 channels, up to 4 ATA 66/100 IDE devicesOnboard I/O Connectors1 x Floppy Connector2 x USB 2.0/1.1 header (4 ports by optional cable)1 x CD_IN header1 x S/PDIF in/out header (S/PDIF in/out cable optional)1 x CPU fan header with fan rotation detection function2 x System fan headers with fan rotation detectioI/O via Back PanelPS/2 keyboard/mouse, 2 x USB(2.0/1.1), RJ45,2 x Com(serial), 1 x Parallel, 1x Game/Line-in/Line-out/MICPower20-pin ATX power connector, 4-pin ATX 12V power connectorBIOS Feature2Mb Flash EEPROMAward BIOS with ACPI, DMI2.0, PnP, WfM2.0, Green Suspend to RAM (S3), Suspend to Disk (S4) Wake on keyboard/mouse, Wake on LAN/RTC TimerHardware Monitoring3 FAN sensors, CPU/System voltages and temperature monitoringSpecial FeatureZero Jumper DesignAdjustable CPU frequency by 1 MHz increment, Adjustable Vcore, VAGP, VMemoryWatch Dog Timer (auto-reset system when it can not handle overclock configurations)AGP Protection (The AGP Protection canCertificationsFCC, CE, BSMIForm FactorATX (200mm x 294mm)It is highly recommended to always use the most recent driver version available.Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.

1.To fix ATI Radcon 9600 Pro hang on POST 2D when cold boot.2. Fixed Seagate HDD install Windows98 will be show "user.exe error".( This happened on PARTITION > 8G )FeatureIntel Pentium4 Processor (Willamette/Northwood)Socket 478 with FSB 400/533/800 MHz(FSB 800 is by overclocking or using 200MHz Clock Frequency CPU)3 DDR200/266/333/400 (DDR333/400 by overclocking) Memory Sockets3CProcessorSocket 478 Intel PentiumProcessor (Willamette/Northwood)FSB / Transport400/533/800 MHz(FSB 800 is by overclocking or using 200MHz Clock Frequency CPU)ChipsetNorth Bridge : Intel 845ESouth Bridge : Intel ICH4Audio Codec : Realtek ALC650 CodecI/O Chip : Winbond Smart I/O W83627HFLAN Chip : 3Com 3C910-A01 LAN chipMemory3 *DDR SocketsDDR 200/266/333/400 (DDR333/400 by overclocking) NON-ECC DDR SDRAM up to 2GB ( DIMM1 uses 2 Banks/ DIMM2 & DIMM3 share 2 Banks )Expansion Slots1 x AGP 4X slot ( 1.5V only)5 x PCI slots (PCI 2.2 compliant)IDE / SATA Connectors2 ATA66/100 channels, up to 4 ATA 66/100 IDE devicesOnboard I/O Connectors1 x Floppy Connector2 x USB 2.0/1.1 header (4 ports by optional cable)1 x CD_IN header1 x S/PDIF in/out header (S/PDIF in/out cable optional)1 x CPU fan header with fan rotation detection function2 x System fan headers with fan rotation detectioI/O via Back PanelPS/2 keyboard/mouse, 2 x USB(2.0/1.1), RJ45,2 x Com(serial), 1 x Parallel, 1x Game/Line-in/Line-out/MICPower20-pin ATX power connector, 4-pin ATX 12V power connectorBIOS Feature2Mb Flash EEPROMAward BIOS with ACPI, DMI2.0, PnP, WfM2.0, Green Suspend to RAM (S3), Suspend to Disk (S4) Wake on keyboard/mouse, Wake on LAN/RTC TimerHardware Monitoring3 FAN sensors, CPU/System voltages and temperature monitoringSpecial FeatureZero Jumper DesignAdjustable CPU frequency by 1 MHz increment, Adjustable Vcore, VAGP, VMemoryWatch Dog Timer (auto-reset system when it can not handle overclock configurations)AGP Protection (The AGP Protection canCertificationsFCC, CE, BSMIForm FactorATX (200mm x 294mm)It is highly recommended to always use the most recent driver version available.Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.

Initial Release VersionFeatureIntel Pentium4 Processor (Willamette/Northwood)Socket 478 with FSB 400/533/800 MHz(FSB 800 is by overclocking or using 200MHz Clock Frequency CPU)3 DDR200/266/333/400 (DDR333/400 by overclocking) Memory Sockets3CProcessorSocket 478 Intel PentiumProcessor (Willamette/Northwood)FSB / Transport400/533/800 MHz(FSB 800 is by overclocking or using 200MHz Clock Frequency CPU)ChipsetNorth Bridge : Intel 845ESouth Bridge : Intel ICH4Audio Codec : Realtek ALC650 CodecI/O Chip : Winbond Smart I/O W83627HFLAN Chip : 3Com 3C910-A01 LAN chipMemory3 *DDR SocketsDDR 200/266/333/400 (DDR333/400 by overclocking) NON-ECC DDR SDRAM up to 2GB ( DIMM1 uses 2 Banks/ DIMM2 & DIMM3 share 2 Banks )Expansion Slots1 x AGP 4X slot ( 1.5V only)5 x PCI slots (PCI 2.2 compliant)IDE / SATA Connectors2 ATA66/100 channels, up to 4 ATA 66/100 IDE devicesOnboard I/O Connectors1 x Floppy Connector2 x USB 2.0/1.1 header (4 ports by optional cable)1 x CD_IN header1 x S/PDIF in/out header (S/PDIF in/out cable optional)1 x CPU fan header with fan rotation detection function2 x System fan headers with fan rotation detectioI/O via Back PanelPS/2 keyboard/mouse, 2 x USB(2.0/1.1), RJ45,2 x Com(serial), 1 x Parallel, 1x Game/Line-in/Line-out/MICPower20-pin ATX power connector, 4-pin ATX 12V power connectorBIOS Feature2Mb Flash EEPROMAward BIOS with ACPI, DMI2.0, PnP, WfM2.0, Green Suspend to RAM (S3), Suspend to Disk (S4) Wake on keyboard/mouse, Wake on LAN/RTC TimerHardware Monitoring3 FAN sensors, CPU/System voltages and temperature monitoringSpecial FeatureZero Jumper DesignAdjustable CPU frequency by 1 MHz increment, Adjustable Vcore, VAGP, VMemoryWatch Dog Timer (auto-reset system when it can not handle overclock configurations)AGP Protection (The AGP Protection canCertificationsFCC, CE, BSMIForm FactorATX (200mm x 294mm)It is highly recommended to always use the most recent driver version available.Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.