Abit

# Support Pentium 4 2.4G CPU.# Fix occasional no POST with debug code 26 issue while "Fixed PCI=33" option was enabled in Softmenu III.# Support P4 Celeron CPU.# HPT 37x BIOS version 2.31. The RAID function is for BD7-RAID and BW7-RAID only. This BIOS version is also for non RAID boards and HPT BIOS will be automatically disabled while RAID controller chip not detected.# BIOS compile date: 5/14/2002!!!Attention for upgrading BIOS!!!* When you upgrade bios to new bios included HPT 2.31 bios, we highly recommend you backup your system and data to an independent storage device first. New HPT 2.31 bios may corrupt original RAID configuration created on old bios occasionally. That means you may need to rebuild RAID configuration. If it happens, all the data on RAID-0 will be gone!* For RAID-1 user, please press "CTRL H" to enter hpt37x setup.*Please upgrade HPT 2.31 driver before upgrade bios.It is highly recommended to always use the most recent driver version available.Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.

1. Modify the DMI data to fix on line diagnostic tool issue (PC Pitstop). 2. HPT 37x BIOS version 2.0.1024. The reason to change BIOS v2.31 to v2.0.1024 are as below: * System can not resume from STR mode under Win XP, while HDD connected onto HighPoint IDE Port by using HPT v2.31 BIOS. * Improve performance declined on HPT BIOS v2.31 issue. 3. BIOS compile date: 7/02/2002.It is highly recommended to always use the most recent driver version available.Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.

1. The Default of year setup to 2002. 2. Raise the adjustable CPU Core Voltage for Pentium 4 processor. 3. Fix ACPI error in system event viewer after resume from STR mode. 4. HPT BIOS Version 2.0.1024. 5. BIOS Compile Date: 3/14/2002.It is highly recommended to always use the most recent driver version available.Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.

1. Fix the CD-ROM boot issue on the SCSI cards. 2. Fix the unbootable issue when installing a hard disk onto IDE-2 and set the boot sequence by following as HDD_1, HDD_0 then floppy. 3. HPT BIOS version: 2.0.1024.It is highly recommended to always use the most recent driver version available.Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.

1. Fix the option "Shutdown When CPU Fan Fail" set to Enable, cause system delayed issue. 2. Improve the STR function. 3. HPT 370 RAID BIOS version: 1.11.0402.It is highly recommended to always use the most recent driver version available.Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.

# First release.# HPT370 BIOS version: 1.11.0402It is highly recommended to always use the most recent driver version available.Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.

1. Change "CPU Disconnect Function" default setting. 2. Add AMD Duron 1400(133)/1600(133)/1800(133) support. 3. Fix the issue that the system occasionally hangs at post code 26 if the system is using 133/166 FSB CPU and the power was turned off during boot up procedure when the post code is AE. 4. Change the BIOS of HPT 372 to version 2.34 for 48-bit LBA support (HDD size larger then 137GB). The RAID function is for KD7-RAID only. This BIOS version is also for non-RAID boards and HPT BIOS will be automatically disabled while RAID controller chip is not detected. 5. BIOS compile date: 08/28/2003.Specifications:Based on the VIA KT400 chipset with supporting for the latest Athlon, Athlon XP, Barton, and Duron CPUs, the KD7-RAID offers unparalleled performance for your PC. The KD7-RAID features 4 DDR DIMM slots, two of which support high-speed DDR 400 memory. The KD7-RAID also supports the latest AGP 8X standard, providing you unprecedented graphic performance. ATA133 with RAID 0, 1, 0 1 function makes both the speed and the security of your data vastly improved. Combining the latest technologies with ABIT engineering and innovation, the KD7-RAID delivers the power to drive the most demanding applications. AGP 8XAGP 3.0 8X spec support high performance graphic process purpose and at a peak bandwidth of 2.1 GB/s. DDR400Supports up to 2GB of DDR333/400 at a peak bandwidth and 3.5GB of DDR200/266 of 2.7/3.2GB/s at 1.6/2.1 GB/s 5bit FID (Frequency ID)By ABIT 5-bits FID Override technology, users can get variety of CPU over-clocking sets. ABIT CPU H.T.P (Hardware Thermal Protection) ABIT CPU H.T.P. uses pure hardware detection, which not like others use software detection to prevent CPU overheating. ABIT CPU H.T.P provides more reliable result for customers' investment. ABIT SoftMenu OverclockingThe overclocking function includes CPU frequency, Vcore, multiplier, chipset & DDR voltage and AGP VDDQ voltage adjustment available to maximize your system performance. USB 2.0Support speed up to 480 Mbps. Approximately forty times faster than conventional USB 1.1 6-Channel Audio and S/PDIF OutLet you enjoy 6-channel audio without having to buy advanced sound cards. RAID 0/1/0 1Supports the most advanced ATA133 HDDs with RAID 0/1/0 1 onboard HPT372 RAID controller enables enhanced functionality and HDDs performance without the cost of additional add-on cards.It is highly recommended to always use the most recent driver version available.Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.

1. Follow AMD's recommendation that" CPU Disconnect Function "should be iimplemented to make CPU slow down in idle state, and the default value sets up to Enable. 2. Follow AMD's recommendation to revise the trigger timing of LM90 for Palomino CPU(model 6). 3. Fix the SCSI BIOS malfunction problem when three add-on cards installed together, PCI S3 VGA GF4 MX420 DC390U3W(at PCI-1). 4. Supports Barton 2600 (333 FSB)and Thorton2000 (266 FSB)/2200 (266 FSB)/2400 (266 FSB)/2600 (333 FSB). 5. Revises some CPU frequency(1466,1666,1916,2166) to be AMD officially suggested figures.(1467,1667,1917,2167). 6. BIOS compile date 4/02/2003.Specifications:Based on the VIA KT400 chipset with supporting for the latest Athlon, Athlon XP, Barton, and Duron CPUs, the KD7-RAID offers unparalleled performance for your PC. The KD7-RAID features 4 DDR DIMM slots, two of which support high-speed DDR 400 memory. The KD7-RAID also supports the latest AGP 8X standard, providing you unprecedented graphic performance. ATA133 with RAID 0, 1, 0 1 function makes both the speed and the security of your data vastly improved. Combining the latest technologies with ABIT engineering and innovation, the KD7-RAID delivers the power to drive the most demanding applications. AGP 8XAGP 3.0 8X spec support high performance graphic process purpose and at a peak bandwidth of 2.1 GB/s. DDR400Supports up to 2GB of DDR333/400 at a peak bandwidth and 3.5GB of DDR200/266 of 2.7/3.2GB/s at 1.6/2.1 GB/s 5bit FID (Frequency ID)By ABIT 5-bits FID Override technology, users can get variety of CPU over-clocking sets. ABIT CPU H.T.P (Hardware Thermal Protection) ABIT CPU H.T.P. uses pure hardware detection, which not like others use software detection to prevent CPU overheating. ABIT CPU H.T.P provides more reliable result for customers' investment. ABIT SoftMenu OverclockingThe overclocking function includes CPU frequency, Vcore, multiplier, chipset & DDR voltage and AGP VDDQ voltage adjustment available to maximize your system performance. USB 2.0Support speed up to 480 Mbps. Approximately forty times faster than conventional USB 1.1 6-Channel Audio and S/PDIF OutLet you enjoy 6-channel audio without having to buy advanced sound cards. RAID 0/1/0 1Supports the most advanced ATA133 HDDs with RAID 0/1/0 1 onboard HPT372 RAID controller enables enhanced functionality and HDDs performance without the cost of additional add-on cards.It is highly recommended to always use the most recent driver version available.Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.

# Supports Athlon XP 2500 (333), 2800 (333), 3000 (333) CPU.# Change the definition of UUID in DMI data- move the MAC address from top to bottom of the string.# The default year in BIOS set up to 2003.# Fix Athlon XP 1400(100) CPU failed to power up issue.# HPT 372 BIOS Version 2.32. The RAID function is for KD7-RAID only. This BIOS version is also for non RAID boards and HPT BIOS will be automatically disabled while RAID controller chip not detected.# BIOS Compile Date: 1/03/2003Specifications:Based on the VIA KT400 chipset with supporting for the latest Athlon, Athlon XP, Barton, and Duron CPUs, the KD7-RAID offers unparalleled performance for your PC. The KD7-RAID features 4 DDR DIMM slots, two of which support high-speed DDR 400 memory. The KD7-RAID also supports the latest AGP 8X standard, providing you unprecedented graphic performance. ATA133 with RAID 0, 1, 0 1 function makes both the speed and the security of your data vastly improved. Combining the latest technologies with ABIT engineering and innovation, the KD7-RAID delivers the power to drive the most demanding applications. AGP 8XAGP 3.0 8X spec support high performance graphic process purpose and at a peak bandwidth of 2.1 GB/s. DDR400Supports up to 2GB of DDR333/400 at a peak bandwidth and 3.5GB of DDR200/266 of 2.7/3.2GB/s at 1.6/2.1 GB/s 5bit FID (Frequency ID)By ABIT 5-bits FID Override technology, users can get variety of CPU over-clocking sets. ABIT CPU H.T.P (Hardware Thermal Protection) ABIT CPU H.T.P. uses pure hardware detection, which not like others use software detection to prevent CPU overheating. ABIT CPU H.T.P provides more reliable result for customers' investment. ABIT SoftMenu OverclockingThe overclocking function includes CPU frequency, Vcore, multiplier, chipset & DDR voltage and AGP VDDQ voltage adjustment available to maximize your system performance. USB 2.0Support speed up to 480 Mbps. Approximately forty times faster than conventional USB 1.1 6-Channel Audio and S/PDIF OutLet you enjoy 6-channel audio without having to buy advanced sound cards. RAID 0/1/0 1Supports the most advanced ATA133 HDDs with RAID 0/1/0 1 onboard HPT372 RAID controller enables enhanced functionality and HDDs performance without the cost of additional add-on cards.It is highly recommended to always use the most recent driver version available.Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.

1. Revises the initial mechanism of PCI expand ROM for add-on PCI cards with BIOS (SCSI card, LAN card, ...etc.). 2. Adds "Enhance PCI Performance" function to improve PCI RAID performance. 3. Fixes issue where the "Shutdown When CPU FAN Fail" option fails after about 16 minutes idling under Windows 2000/XP. 4. Fixes KD7-E SSID resume error from S3 mode under Windows XP. 5. Changes ACPI Code to pass HCT ACPI test. 6. HPT 372 BIOS Version 2.32. The RAID function is for KD7-RAID only. This BIOS version is also for non RAID boards and HPT BIOS will be automatically disabled when the RAID controller chip is not detected. 7. BIOS compile Date: 11/12/2002.Specifications:Based on the VIA KT400 chipset with supporting for the latest Athlon, Athlon XP, Barton, and Duron CPUs, the KD7-RAID offers unparalleled performance for your PC. The KD7-RAID features 4 DDR DIMM slots, two of which support high-speed DDR 400 memory. The KD7-RAID also supports the latest AGP 8X standard, providing you unprecedented graphic performance. ATA133 with RAID 0, 1, 0 1 function makes both the speed and the security of your data vastly improved. Combining the latest technologies with ABIT engineering and innovation, the KD7-RAID delivers the power to drive the most demanding applications. AGP 8XAGP 3.0 8X spec support high performance graphic process purpose and at a peak bandwidth of 2.1 GB/s. DDR400Supports up to 2GB of DDR333/400 at a peak bandwidth and 3.5GB of DDR200/266 of 2.7/3.2GB/s at 1.6/2.1 GB/s 5bit FID (Frequency ID)By ABIT 5-bits FID Override technology, users can get variety of CPU over-clocking sets. ABIT CPU H.T.P (Hardware Thermal Protection) ABIT CPU H.T.P. uses pure hardware detection, which not like others use software detection to prevent CPU overheating. ABIT CPU H.T.P provides more reliable result for customers' investment. ABIT SoftMenu OverclockingThe overclocking function includes CPU frequency, Vcore, multiplier, chipset & DDR voltage and AGP VDDQ voltage adjustment available to maximize your system performance. USB 2.0Support speed up to 480 Mbps. Approximately forty times faster than conventional USB 1.1 6-Channel Audio and S/PDIF OutLet you enjoy 6-channel audio without having to buy advanced sound cards. RAID 0/1/0 1Supports the most advanced ATA133 HDDs with RAID 0/1/0 1 onboard HPT372 RAID controller enables enhanced functionality and HDDs performance without the cost of additional add-on cards.It is highly recommended to always use the most recent driver version available.Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.