1.Improve CPU_FAN speed detection every 0.1 sec.
2.Change CPU_FAN default setting to 'Auto' and the way displaying CPU temperature.
Features:
Intel Pentium4 Processor (Prescott)
Socket 478 with FSB 533/800 MHz
4 DDR 333/400 Memory Sockets ( Dual Channel)
1*PCI Express x 16, 2*PCI Express x 1, 3*PCI Slots
8 Channel HD Audio,Marvell Gbits Ethernet LAN & VIA 10/100 Ethernet LAN
4 Serial
Processor
Intel Pentium4 Processor (Prescott)
FSB / Transport
533/800 MHz
Chipset
North Bridge : Intel 915G (Grantsdale G)
South Bridge : Intel ICH6
HD Audio Codec : Realtek ALC880
I/O Chip: Winbond Smart I/O W83627THF
Memory
4 * DDR Sockets:
DDR333/400 NON-ECC DDR SDRAM up to 4GB
Expansion Slots
1 x PCI Express x 16
2 x PCI Express x 1
3 x PCI slots (PCI 2.3 compliant)
IDE / SATA Connectors
1* ATA100 Channel, up to 2 ATA 100 IDE devices
Onboard I/O Connectors
1 x Floppy Connector
2 x USB 2.0/1.1 header (4 ports by optional cable)
1 x CD_IN header
1 x S/PDIF in/out header (S/PDIF in/out cable optional)
1 x CPU fan header ( 1 fan rotation detection function )
2 x System fan headers ( 2 fan rotation detectio
I/O via Back Panel
PS/2 keyboard/mouse, 4 x USB(2.0/1.1), 1 x Com(serial), 1 x Parallel,1 x VGA, 1xLine-in/Line-out(Speaker Out)/MIC/SUR_CEN/SUR/R:WOF,L:CEN
Power
24-pin ATX power connector, 4-pin ATX 12V power connector
BIOS Feature
4Mb Flash EEPROM
Award BIOS with ACPI, DMI2.0, PnP, WfM2.0, Green Suspend to RAM (S3), Suspend to Disk (S4) Wake on keyboard/mouse, Wake on LAN/RTC Timer
Hardware Monitoring
3 FAN sensors, CPU/System voltages and temperature monitoring
Special Feature
Zero Jumper Design
Adjustable CPU frequency by 1 MHz increment, Adjustable Vcore, VAGP, VMemory for overclocking
Watch Dog Timer (auto-reset system when it can not handle overclock configurations
Certifications
FCC, CE, BSMI
Form Factor
ATX (244mm x 305mm)
It is highly recommended to always use the most recent driver version available.
Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.
Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.
