Supports Celeron D CPU.
Features:
Intel Pentium4 Processor (Northwood/Prescott(FMB1.0))
Socket 478 with FSB 400/533/800 MHz
2 DDR266/333/400 Memory Sockets
6 Channel AC97 Audio
3Com 10/100 Ethernet LAN
2 ATA100 Channels, up to 4 ATA 100 IDE Devices
6 USB 2.0/1.1 Ports (4 ports by optional cable)
Processor
Socket 478 Intel Pentium4 Processor (Northwood/Prescott(FMB1.0))
FSB / Transport
400/533/800 MHz
Chipset
North Bridge : Intel 848P
South Bridge : Intel ICH4
LAN Chip : 3Com 3C920
AC97 Audio Codec : Realtek ALC655
I/O Chip: Winbond Smart I/O W83627HF
Memory
2 * DDR Sockets:
DDR400/333/DDR266 NON-ECC DDR SDRAM up to 2GB
Note 1: If the FSB of your CPU is 400 MHz, the memory speed supports only DDR 266.
Note 2: If the FSB of your CPU is 533 MHz, the memory speed supports DDR 266/333
Note 3: If the FSB of your CPU is 800 MHz, the memory speed supports DDR 266/333/400
Expansion Slots
1 x AGP(3.0) 8X slot (1.5V only)
5 x PCI slots (PCI 2.3 compliant)
IDE / SATA Connectors
2 ATA100/66 Channels, up to 4 ATA 66/100 IDE devices
Onboard I/O Connectors
1 x Floppy Connector
2 x USB 2.0/1.1 header (4 ports by optional cable)
1 x CD_IN header
1 x S/PDIF in/out header (S/PDIF in/out cable optional)
1 x CPU fan header ( 1 fan rotation detection function )
2 x System fan headers ( 2 fan rotation detection function )
2 x System fan headers ( 2 fan rotation detection function )
2 x 5 pin system panel header (Intel spec)
1 x 3 pin Power LED header
1 x Front audio header (Intel spec)
1 x IrDA header
1 x Case Open detection header
I/O via Back Panel
PS/2 keyboard/mouse, 2 x USB(2.0/1.1), RJ45,2 x Com(serial), 1 x Parallel, 1xLine-in/Line-out(Speaker Out)/MIC
Power
20-pin ATX power connector, 4-pin ATX 12V power connector
BIOS Feature
3Mb Flash EEPROM
Award BIOS with ACPI, DMI2.0, PnP, WfM2.0, Green Suspend to RAM (S3), Suspend to Disk (S4) Wake on keyboard/mouse, Wake on LAN/RTC Timer
Hardware Monitoring
3 FAN sensors, CPU/System voltages and temperature monitoring
Special Feature
Zero Jumper Design
Watch Dog Timer (auto-reset system when it can not handle overclock configurations)
AGP Protection (The AGP Protection can ensure the AGP card voltage to be 1.5V, to protect the mainboard and the AGP card.)
Certifications
FCC, CE, BSMI
Form Factor
ATX (305mm x 200mm)
It is highly recommended to always use the most recent driver version available.
Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.
Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.
