Initial Release Version
Motherboard overview:
Feature
Intel Pentium 4 Processor (Willamette/Northwood/Prescott (FMB1.0))
Socket 478 with FSB 400/533/800(by overclocking) MHz
2 DDR200/266/333/400(by overclocking) Memory Sockets
6 channel AC 97 Audio
VIA 10/100 Ethernet LAN
2 ATA100 Channels, up to
Processor
Socket 478 Intel Pentium? 4 Processor (Willamette/Northwood/Prescott (FMB1.0))
FSB / Transport
400/533/800(by overclocking) MHz
Chipset
North Bridge: Intel 845GV
South Bridge: Intel ICH4
Audio Codec: Realtek ALC655
I/O Chip : Winbond W83627HF
LAN Chip : VIA 6105 LAN
Memory
2 * DDR Sockets
DDR200/266/333/400(by overclocking) NON-ECC DDR SDRAM up to 2GB
Expansion Slots
1 x ADD Card Slot
2 x PCI slots (PCI 2.2 compliant)
IDE / SATA Connectors
2 ATA100 channels, up to 4 ATA 100 IDE devices
Onboard I/O Connectors
1 x Floppy Connector
2 x USB 2.0/1.1 header (2 ports by optional cable)
1 x CD_IN header
1 x COM (serial) port header (Optional COM cable)
1 x S/PDIF in/out header (S/PDIF in/out cable optional)
1 x CPU fan header with fan rotation detection functio
I/O via Back Panel
PS/2 keyboard/mouse, 2 x USB(2.0/1.1), RJ45 ,1 x VGA ,1 x Com(serial), 1 x Parallel, 1x Game/Line-in/Line-out/MIC
Power
20-pin ATX power connector, 4-pin ATX 12V power connector
BIOS Feature
3Mb Flash EEPROM
Award BIOS with ACPI, DMI2.0, PnP, WfM2.0, Green Suspend to RAM (S3), Suspend to Disk (S4) Wake on keyboard/mouse, Wake on LAN/RTC Timer
Hardware Monitoring
2 FAN sensors, CPU/System voltages and temperature monitoring
Special Feature
Zero Jumper Design
Watch Dog Timer (auto-reset system when it can not handle overclock configurations)
AGP Protection (The AGP Protection can ensure the AGP card voltage to be 1.5V,
to protect the mainboard and the AGP card.)
Certifications
FCC, CE, BSMI
Form Factor
Micro-ATX (244mm x 230mm)
It is highly recommended to always use the most recent driver version available.
Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.
Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.
